点击图片查看原图
产品描述
Description 750 Multi-Function Series 2/2 - 3/2
750 multi-function Series encloses 8 separately controlled shutters in a single body. Its base version has 8 outputs with the following configurations:
- four 3/2 NC outlets four 3/2 NC outlets.
- two 2/2 NC outlets.
- two 2/2 NO inverted flow outlets.
The extreme modularity of 750 Series allows the arrangement of an almost unlimited number of customized configurations. For this aim, contact your local dealer or MATRIX technical staff.
750 multi-function Series is particularly fit for the control of intricate pneumatic system, where different functions are integrated.
In the present model, all the innovations offered by Matrix technology (this combines special dynamic performance to the simplicity and reliability of manufacture) are present. Response times are of millisecond range, while operation life is over 500 million cycles.
With a speed-up kind control, dynamic characteristics are even more improved. Standard 12 / 24 VDC control solenoid valves have a response time lower than 5 ms in opening and than 2 ms in closing, with a maximum operation frequency 200 Hz. Speed-up control solenoid valves have a response time lower than 2 ms both in opening and in closing, with a maximum operation frequency of 300 Hz.
Besides high-speed characteristics, 750 Series solenoid valves offer flow rate values up to 100 l/minute (ANR) for every single outlet, with feeding (supply) pressure from 0 to 8 bar.
For 750 multi-function series, a lot of accessories is available, such as IP 52 or IP 65 connectors, manifolds with different positions and speed-up driver boards.
Advantages
- Compact dimension.
- Short response times.
- Insensitivity to frequency work and to vibrations.
- Low absorbed power.
- Precision, repetitiveness and flexibility.
- Long operating life.
Applications
- Process and precision instrumentation.
- Pressure and flow rate control devices.
- Positioning systems.
- Biomedical and measure sector.
- Robotics and industrial automation.
Materials
- Body in PPS.
- Flanges in Al.
- Seals in NBR (shutters in HNBR if required).
• 758 2/2 - 3/2 NC - NO
General Characteristics
Control Direct - PFM - PWM
Type and function n.4 3/2 - n.2 2/2 n.6 NC
n.2 2/2 Inverted flow n.2 NO
Fluid Non-lubricated dry air, neutral gases
(-10 +50 °C)
Filtration rating 40 µ
Temperature -10 +50 °C (standard version)
Response time in
opening 12 / JJ< 5 ms KK < 2 ms
Response time in closing 12 / JJ< 5 ms KK < 2 ms
Maximum frequency 200 Hz 300 Hz
Weight 350 g
Product life expectancy ≥ 500 M/s cycles
IP rating IP 52 - IP 62 - IP 65
Flow rate (at 6 bar) 50 Nl/min
80 Nl/min
100 Nl/min (Control tension JJ / XX / KK)
Version Standard
HNBR Shutters
N. Outlets 8 Outlets
N. Electrical controls 8 Controls
Port Connection Integrated cables IP 62 L=500 mm
Presetting for Easy connecction
IP 52 - IP 65
Special Protections Only with EASY IP 65 port connection
Stainless Steel (Inox) flanges
Epox Black varnished flanges
Control tension 12 VDC ± 10% - ED 100% - 1.4 W
24 VDC ± 10% - ED 100% (1) - 1.9 W
Speed-up in tension - ED 100% (1)
Operating pressure 0 - 4 bar (All models)
4 - 8 bar (All models)
0 - 8 bar (... KK)
2 - 6 bar (All models)
(1) Only with Electronic Driver Boards PRB or UDB
MATRIX/MATRIX电磁阀/分气阀